Skip to content

Command Line Basics

Lab Environment Setup

One can use an online bash interpreter to run all the commands that are provided as examples in this course. This will also help you in getting a hands-on experience of various linux commands.

REPL is one of the popular online bash interpreters for running linux commands. We will be using it for running all the commands mentioned in this course.

What is a Command

A command is a program that tells the operating system to perform specific work. Programs are stored as files in linux. Therefore, a command is also a file which is stored somewhere on the disk.

Commands may also take additional arguments as input from the user. These arguments are called command line arguments. Knowing how to use the commands is important and there are many ways to get help in Linux, especially for commands. Almost every command will have some form of documentation, most commands will have a command-line argument -h or --help that will display a reasonable amount of documentation. But the most popular documentation system in Linux is called man pages - short for manual pages.

Using --help to show the documentation for ls command.

File System Organization

The linux file system has a hierarchical (or tree-like) structure with its highest level directory called root ( denoted by / ). Directories present inside the root directory stores file related to the system. These directories in turn can either store system files or application files or user related files.

bin | The executable program of most commonly used commands reside in bin directory

sbin | This directory contains programs used for system administration.

home | This directory contains user related files and directories.

lib | This directory contains all the library files

etc | This directory contains all the system configuration files

proc | This directory contains files related to the running processes on the system

dev | This directory contains files related to devices on the system

mnt | This directory contains files related to mounted devices on the system

tmp | This directory is used to store temporary files on the system

usr | This directory is used to store application programs on the system

Commands for Navigating the File System

There are three basic commands which are used frequently to navigate the file system:

  • ls

  • pwd

  • cd

We will now try to understand what each command does and how to use these commands. You should also practice the given examples on the online bash shell.

pwd (print working directory)

At any given moment of time, we will be standing in a certain directory. To get the name of the directory in which we are standing, we can use the pwd command in linux.

We will now use the cd command to move to a different directory and then print the working directory.

cd (change directory)

The cd command can be used to change the working directory. Using the command, you can move from one directory to another.

In the below example, we are initially in the root directory. we have then used the cd command to change the directory.

ls (list files and directories)**

The ls command is used to list the contents of a directory. It will list down all the files and folders present in the given directory.

If we just type ls in the shell, it will list all the files and directories present in the current directory.

We can also provide the directory name as argument to ls command. It will then list all the files and directories inside the given directory.

Commands for Manipulating Files

There are five basic commands which are used frequently to manipulate files:

  • touch

  • mkdir

  • cp

  • mv

  • rm

We will now try to understand what each command does and how to use these commands. You should also practice the given examples on the online bash shell.

touch (create new file)

The touch command can be used to create an empty new file. This command is very useful for many other purposes but we will discuss the simplest use case of creating a new file.

General syntax of using touch command

touch <file_name>

mkdir (create new directories)

The mkdir command is used to create directories.You can use ls command to verify that the new directory is created.

General syntax of using mkdir command

mkdir <directory_name>

rm (delete files and directories)

The rm command can be used to delete files and directories. It is very important to note that this command permanently deletes the files and directories. It's almost impossible to recover these files and directories once you have executed rm command on them successfully. Do run this command with care.

General syntax of using rm command:

rm <file_name>

Let's try to understand the rm command with an example. We will try to delete the file and directory we created using touch and mkdir command respectively.

cp (copy files and directories)

The cp command is used to copy files and directories from one location to another. Do note that the cp command doesn't do any change to the original files or directories. The original files or directories and their copy both co-exist after running cp command successfully.

General syntax of using cp command:

cp <source_path> <destination_path>

We are currently in the '/home/runner' directory. We will use the mkdir command to create a new directory named "test_directory". We will now try to copy the "_test_runner.py" file to the directory we created just now.

Do note that nothing happened to the original "_test_runner.py" file. It's still there in the current directory. A new copy of it got created inside the "test_directory".

We can also use the cp command to copy the whole directory from one location to another. Let's try to understand this with an example.

We again used the mkdir command to create a new directory called "another_directory". We then used the cp command along with an additional argument '-r' to copy the "test_directory".

mv (move files and directories)

The mv command can either be used to move files or directories from one location to another or it can be used to rename files or directories. Do note that moving files and copying them are very different. When you move the files or directories, the original copy is lost.

General syntax of using mv command:

mv <source_path> <destination_path>

In this example, we will use the mv command to move the "_test_runner.py" file to "test_directory". In this case, this file already exists in "test_directory". The mv command will just replace it. Do note that the original file doesn't exist in the current directory after mv command ran successfully.

We can also use the mv command to move a directory from one location to another. In this case, we do not need to use the '-r' flag that we did while using the cp command. Do note that the original directory will not exist if we use mv command.

One of the important uses of the mv command is to rename files and directories. Let's see how we can use this command for renaming.

We have first changed our location to "test_directory". We then use the mv command to rename the ""_test_runner.py" file to "test.py".

Commands for Viewing Files

There are three basic commands which are used frequently to view the files:

  • cat

  • head

  • tail

  • more

  • less

We will now try to understand what each command does and how to use these commands. You should also practice the given examples on the online bash shell.

We will create a new file called "numbers.txt" and insert numbers from 1 to 100 in this file. Each number will be in a separate line.

Do not worry about the above command now. It's an advanced command which is used to generate numbers. We have then used a redirection operator to push these numbers to the file. We will be discussing I/O redirection in the later sections.

cat

The most simplest use of cat command is to print the contents of the file on your output screen. This command is very useful and can be used for many other purposes. We will study about other use cases later.

You can try to run the above command and you will see numbers being printed from 1 to 100 on your screen. You will need to scroll up to view all the numbers.

The head command displays the first 10 lines of the file by default. We can include additional arguments to display as many lines as we want from the top.

In this example, we are only able to see the first 10 lines from the file when we use the head command.

By default, head command will only display the first 10 lines. If we want to specify the number of lines we want to see from start, use the '-n' argument to provide the input.

tail

The tail command displays the last 10 lines of the file by default. We can include additional arguments to display as many lines as we want from the end of the file.

By default, the tail command will only display the last 10 lines. If we want to specify the number of lines we want to see from the end, use '-n' argument to provide the input.

In this example, we are only able to see the last 5 lines from the file when we use the tail command with explicit -n option.

more

More command displays the contents of a file or a command output, displaying one screen at a time in case the file is large (Eg: log files). It also allows forward navigation and limited backward navigation in the file.

less

Less command is an improved version of more. It displays the contents of a file or a command output, one page at a time. It allows backward navigation as well as forward navigation in the file and also has search options. You can go to the beginning and the end of a file instantly.

Echo Command in Linux

The echo command is one of the simplest commands that is used in the shell. This command is equivalent to what we have in other programming languages.

The echo command prints the given input string on the screen.

Text Processing Commands

In the previous section, we learned how to view the content of a file. In many cases, we will be interested in performing the below operations:

  • Print only the lines which contain a particular word(s)

  • Replace a particular word with another word in a file

  • Sort the lines in a particular order

There are three basic commands which are used frequently to process texts:

  • grep

  • sed

  • sort

We will now try to understand what each command does and how to use these commands. You should also practice the given examples on the online bash shell.

We will create a new file called "numbers.txt" and insert numbers from 1 to 10 in this file. Each number will be in a separate line.

grep

The grep command in its simplest form can be used to search particular words in a text file. It will display all the lines in a file that contains a particular input. The word we want to search is provided as an input to the grep command.

General syntax of using grep command:

grep <word_to_search> <file_name>

In this example, we are trying to search for a string "1" in this file. The grep command outputs the lines where it found this string.

sed

The sed command in its simplest form can be used to replace a text in a file.

General syntax of using the sed command for replacement:

sed 's/<text_to_replace>/<replacement_text>/' <file_name>

Let's try to replace each occurrence of "1" in the file with "3" using sed command.

The content of the file will not change in the above example. To do so, we have to use an extra argument '-i' so that the changes are reflected back in the file.

sort

The sort command can be used to sort the input provided to it as an argument. By default, it will sort in increasing order.

Let's first see the content of the file before trying to sort it.

Now, we will try to sort the file using the sort command. The sort command sorts the content in lexicographical order.

The content of the file will not change in the above example.

I/O Redirection

Each open file gets assigned a file descriptor. A file descriptor is an unique identifier for open files in the system. There are always three default files open, stdin (the keyboard), stdout (the screen), and stderr (error messages output to the screen). These files can be redirected.

Everything is a file in linux - https://unix.stackexchange.com/questions/225537/everything-is-a-file

Till now, we have displayed all the output on the screen which is the standard output. We can use some special operators to redirect the output of the command to files or even to the input of other commands. I/O redirection is a very powerful feature.

In the below example, we have used the '>' operator to redirect the output of ls command to output.txt file.

In the below example, we have redirected the output from echo command to a file.

We can also redirect the output of a command as an input to another command. This is possible with the help of pipes.

In the below example, we have passed the output of cat command as an input to grep command using pipe(|) operator.

In the below example, we have passed the output of sort command as an input to uniq command using pipe(|) operator. The uniq command only prints the unique numbers from the input.

I/O redirection - https://tldp.org/LDP/abs/html/io-redirection.html

Comments